齿轮,轴承,链条油
使用安润龙合成润滑剂是提高性能、节约成本的明智选择。
安润龙合成润滑剂正在为全世界范围内的工业生产线、传送系统、能量传递设备及其他工厂生产应用设备中的齿轮、轴承和链条提高性能、增强防护和减少维护需求而不懈努力。
根据您特殊的工作环境，润滑剂的应用需求常常存在极大差别；因此，我们的优化系统设计将诸多情况进行了综合考虑。然而，在决定投资成本的时候，往往被忽视的事实是：对润滑剂的选择与对原始设备的选择是同等重要的。
齿轮箱越来越小，承受着频繁的高速重负荷的运转，导致更高的工作温度。而储油量的降低，使润滑油必须提供更有效的冷却性能和更高的抗污染物能力。
齿轮和轴承在工作时可能遇到水、蒸汽或其他液体或固体污染物，但它们必须经常性地在承受重载或冲击负荷、承受极高或极低的温度的同时，以极高的速度运转。以上任何条件下，您所选用的润滑油或润滑脂都必须能够在金属表面保持一层完整的润滑膜。
| Product | Short description |
| ANDEROL 2100 HTCL | ANDEROL 2100 HTCL is an ISO 100 synthetic ester based chain lubricant specifically designed to provide longterm lubrication even under severe heavy duty and extreme ambient conditions. |
| ANDEROL 2150 HTCL | ANDEROL 2150 HTCL is an ISO 150 synthetic ester based chain lubricant specifically designed to provide longterm lubrication even under severe heavy duty and extreme ambient conditions. |
| ANDEROL 2220 HTCL | ANDEROL 2220 HTCL is an ISO 220 synthetic ester based chain lubricant specifically designed to provide longterm lubrication even under severe heavy duty and extreme ambient conditions. |
| ANDEROL 2320 HTCL | ANDEROL 2320 HTCL is an ISO 320 synthetic ester based chain lubricant specifically designed to provide longterm lubrication even under severe heavy duty and extreme ambient conditions. |
| ANDEROL 2460 HTCL | ANDEROL 2460 HTCL is an ISO 460 synthetic ester based chain lubricant specifically designed to provide longterm lubrication even under severe heavy duty and extreme ambient conditions. |
| ANDEROL CHAIN OIL XL-220 | The ANDEROL Chain Oil XL-220 is a high performance polyolester based chain oil designed foruse in both tunnel ovens and spiral ovens. The product uses patented technology to provide highflash and fire points. |
| ANDEROL 402 | ANDEROL 402 (ISO Grade 10/15) is a synthetic diester-based lubricating oil that meets both Mil-PRF-6085D and BOEING BMS 3-7C specifications. |
| ANDEROL 456 | ANDEROL 456 (ISO Grade 32) is a synthetic diester-based lubricant, which is formulated, to provide excellent lubrication over a wide temperature range, resist gumming and deposit formation and to minimize wears. |
| ANDEROL 465 | ANDEROL® 465 as an ISO Grade 68 (nominal), synthetic diester-based lubricant that is formulated to offer extended lubrication over a wide temperature range, resist gumming and speed fluctuations, and minimize wear. |
| ANDEROL 5150 XEP | ANDEROL 5150 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micropitting resistance. |
| ANDEROL 5220 XEP | ANDEROL 5220 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was designed to withstand heavy loads and severe conditions resulting in very good micropitting resistance. |
| ANDEROL 5320 XEP | ANDEROL 5320 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was formulated to withstand heavy loads and severe conditions resulting in very good micropitting resistance. |
| ANDEROL 5460 XEP | ANDEROL 5460 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was formulated to withstand heavy loads and severe conditions resulting in very good micropitting resistance. |
| ANDEROL 5680 XEP | ANDEROL 5680 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was formulated to withstand heavy loads and severe conditions resulting in very good micropitting resistance. |
| ANDEROL 5999 XEP | ANDEROL 5999 XEP is a synthetic based, high performing gear lubricant to be used in industrial equipment. It was formulated to withstand heavy loads and severe conditions resulting in very good micropitting resistance. |
| ANDEROL 7320 FG | ANDEROL 7320 FG is a high performance product, designed primarily for industrial worm gear applications in the food & beverage industry. It may also be considered as a general purpose gear lubricant or to lubricate chains and ways.This fluid is a synthetic Polyalkylene Glycol (PAG) based fluid that provides excellent thermal and oxidative stability, load carrying ability and sludge-free operation over a wide temperature range. The PAG base stock is enhanced with a special mixture of additives providing thermal oxidation stability and anti wear performance. |
| ANDEROL PQAA 1000 | ANDEROL PQAA 1000 is a white oil based H1 registered lubricant, combined with high performance additives. They are designed to provide outstanding lubrication protection to gear sets, bearings and pumps in applications in the Food Industry. ANDEROL PQAA 1000 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe. ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570 ANDEROL PQAA range is available in the grades ISO VG 150, 220, 320, 460, 680 & 1000. |
| ANDEROL PQAA 150 | ANDEROL PQAA 150 is a white oil based H1 registered lubricant, combined with high performance additives. They are designed to provide outstanding lubrication protection to gear sets, bearings and pumps in applications in the Food Industry. ANDEROL PQAA 150 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe. ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570 ANDEROL PQAA range is available in the grades ISO VG 150, 220, 320, 460, 680 & 1000. |
| ANDEROL PQAA 220 | ANDEROL PQAA 220 is a white oil based H1 registered lubricant, combined with high performance additives. They are designed to provide outstanding lubrication protection to gearsets, bearings and pumps in applications in the Food Industry. ANDEROL PQAA 220 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe. ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570 ANDEROL PQAA range is available in the grades ISO VG 150, 220, 320, 460, 680 & 1000. |
| ANDEROL PQAA 320 | ANDEROL PQAA 320 is a white oil based H1 registered lubricant, combined with high performance additives. They are designed to provide outstanding lubrication protection to gear sets, bearings and pumps in applications in the Food Industry. ANDEROL PQAA 320 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe. ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570 ANDEROL PQAA range is available in the grades ISO VG 150, 220, 320, 460, 680 & 1000. |
| ANDEROL PQAA 680 | ANDEROL PQAA 680 is a white oil based H1 registered lubricant, combined with high performance additives. They are designed to provide outstanding lubrication protection to gear sets, bearings and pumps in applications in the Food Industry. ANDEROL PQAA 680 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe. ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570 ANDEROL PQAA range is available in the grades ISO VG 150, 220, 320, 460, 680 & 1000. |